01 / ACTIVATION
Twist-Off Cap & Press Activation
Twist and remove the protective cap first. Hold the device body from the sides, place the activation end against the puncture site and press to trigger the lancet.
M-TYPE SINGLE-USE SAFETY LANCETS
M-Type Safety Lancets with Double-Spring Automatic Retraction
Sterile single-use safety lancets for capillary blood sampling. The M-Type family combines one-step activation, no pre-loading, double-spring needle retraction and a design intended to prevent reuse.
01
One-Step Activation
No separate pre-loading step is required before use.
02
Double-Spring Retraction
Our double-spring system completes triggering and needle retraction within 0.03 seconds.
03
Designed to Prevent Reuse
Our M-Type design is intended to eliminate reuse after activation.
PUBLISHED REFS
4 M-Type SKUs
21G, 23G, 28G and 30G
NEEDLE LENGTH
1.8 / 2.4 mm
Published needle length by REF
STERILIZATION
Irradiation
Published M-Type sterilization method
PACKAGING
100 / Box · 2,000 / Case
Published M-Type case configuration
EXACT-SKU ORDERING DATA
M-Type Safety Lancet Specifications by REF
Order the M-Type family by exact REF, inside code, gauge and published needle length. The 1.8 mm and 2.4 mm values below are our published needle lengths and should not be presented as controlled penetration-depth values.
| REF / SKU | Inside Code | Gauge | Needle Length | Sterilization | Qty / Box | Qty / Case |
|---|---|---|---|---|---|---|
| SL-21-24M | SL-21-24M2 | 21G | 2.4 mm | Irradiation | 100 | 2,000 |
| SL-23-18M | SL-23-18M2 | 23G | 1.8 mm | Irradiation | 100 | 2,000 |
| SL-28-18M | SL-28-18M2 | 28G | 1.8 mm | Irradiation | 100 | 2,000 |
| SL-30-18M | SL-30-18M2 | 30G | 1.8 mm | Irradiation | 100 | 2,000 |
ORDERING CONTROL
Keep the complete REF and inside code together with gauge, needle
length and pack configuration in quotations, artwork and purchase orders.
M-TYPE PRODUCT DIFFERENCES
What Defines the M-Type Safety Lancet
The M-Type format combines one-step activation, a double-spring retraction mechanism, post-use reuse prevention and a tri-bevel needle tip.
02 / DOUBLE-SPRING SYSTEM
Rapid Puncture & Automatic Retraction
When the device is pressed, our double-spring mechanism rapidly advances the needle and automatically retracts it back into the body. Triggering and retraction are completed within 0.03 seconds.
03 / SINGLE-USE SAFETY
Single-Use Anti-Reuse Design
After activation and automatic needle retraction, the device is spent and cannot be reset for another puncture. Our M-Type design is intended to eliminate reuse.
04 / NEEDLE GEOMETRY
Tri-Bevel Needle Tip
We use a specially designed tri-bevel needle tip in the M-Type family. Gauge and needle length remain the primary ordering controls for selecting the required REF.
M-TYPE PACKAGING DIFFERENCE
More Compact Packaging Than the T-Type Format
Our current M-Type format uses approximately 30% less packaging volume than our T-Type format, helping reduce storage-volume and freight-space requirements.
M-TYPE CASE PACK
2,000 pcs / Case
T-TYPE CASE PACK
1,000 pcs / Case
PACKAGING VOLUME VS. T-TYPE
Approx. 30% Less Packaging Volume
M-TYPE OPERATING SEQUENCE
M-Type Safety Lancet Operating Sequence
Our M-Type is used by twisting off the protective cap, holding the device body from the sides and pressing the activation end against the puncture site. Needle puncture and automatic retraction occur within the same activation cycle.
01
Twist the Protective Cap
Hold the lancet body securely and rotate the protective cap to release it before use.
02
Pull Off the Protective Cap
Pull the loosened twisting cap straight away from the lancet body.
03
Hold the Body from the Sides & Press to Activate
Hold the device body from the sides, place the activation end against the intended puncture site and press firmly. The needle rapidly punctures and our double-spring mechanism automatically retracts it back into the device.
04
Discard — Do Not Reuse
After activation and automatic retraction, the device cannot be reset for another puncture. Dispose of it in an appropriate sharps container.
05
Obtain the Blood Sample
Press lightly along the finger toward the puncture site to obtain an adequate capillary blood sample, following the applicable procedure.
MODEL-LEVEL IDENTITY
Selected Model-Level UDI Records
Selected M-Type models have current U.S. GUDID records under the brand. Match the Primary DI to the exact model string and current product label used for the quoted configuration.
SL-21-24M
00850062218321
SL-23-18M
00850011833339
SL-28-18M
00850011833124
These are selected exact-model records. Use the current product label as the controlling source before entering DI data into a procurement system.
Documents Available for Review
Product Specification
Exact REF, inside code, gauge, published needle length, activation format and packaging configuration.
Instructions for Use
Protective-end handling, one-step activation, post-use needle state and disposal instructions.
Sterilization Information
Applicable irradiation and sterile-barrier records for the quoted product configuration.
Packaging & Label Files
Unit packaging, case quantity, label sample, barcode and private-label artwork where applicable.
Regulatory & UDI Records
Applicable regulatory references and model-level UDI records for the target market.
M-TYPE SAFETY LANCET RFQ
Request M-Type Safety Lancet Bulk Pricing
Send the required REF, gauge × needle length, quantity, destination, packaging or private-label requirements and document needs for a SKU-specific quotation.