Compact 0.2L sharps container for small-volume diabetes-care and healthcare supply programs. Review the exact SKU, nominal capacity, disposal opening, translucent top and fill-line visibility, final closure / lock structure, permitted sharps profile, packaging and available documentation before approving the product.
Compact nominal container volume
Published ordering reference
Translucent-top configuration shown
Current SSC-020R listing
The current product page publishes SSC-020R as the listed 0.2L configuration. Use nominal capacity together with the exact opening, closure, fill-line, permitted sharps profile, label and case pack when building a controlled purchase specification.
Final color, lid geometry, lock structure, labeling, packaging and supporting records should be verified against the quoted SKU and destination-market requirement.
| Product Option | Inside Code | Volume | Current Application Scope | Packaging | Qty / Case |
|---|---|---|---|---|---|
| Sharps Container 0.2L | SSC-020R | 0.2L | Used insulin pen needles, lancets and selected small diabetes-care sharps | Case pack | 100 pcs |
| Custom Supply Option | Confirm by SKU | Confirm by SKU | Packaging, labeling and documentation requirements | Custom or case pack | Upon request |
The largest post-use device must fit through the intended opening and settle below the marked fill line without forcing, snagging or protrusion. Confirm the actual pen needle, lancet or other small sharp against the exact SSC-020R configuration before standardizing the container.
Current product imagery highlights the rigid container body, translucent top and fill line, final-lock structure and frosted surface. Review each feature against the exact supplied SKU rather than treating the image as a complete specification.
The current page describes selected 0.2L configurations as having a puncture-resistant container body. For a regulated purchasing program, verify that the performance evidence applies to the exact SSC-020R configuration being supplied.
The translucent top supports visual inspection of container status, while the marked fill line provides the product-specific endpoint for replacement. Do not estimate remaining capacity by eye or force contents below the line.
Selected configurations may include a final-lock mechanism. Confirm temporary and permanent closure states, activation method, reopening resistance and handling instructions for the exact SKU.
Product imagery shows a frosted lid / surface treatment on the current compact container. Verify material, surface texture, stability and handling characteristics from the applicable specification where these fields matter to the program.
A small container can be convenient only when its inlet, usable volume, fill line and closure match the actual devices generated at the point of use. Approve SSC-020R against the complete post-use sharp, placement method and downstream disposal route.
Confirm SSC-020R, current label, nominal 0.2L capacity and destination-market version.
Verify that the actual pen needle, lancet or small sharp fits the intended opening.
Confirm visibility, closure states and replacement procedure before deployment.
Confirm 100/case, receiving data, facility policy and waste-vendor acceptance.
For covered U.S. workplaces, OSHA requires contaminated-sharps containers to be closable, puncture resistant, leakproof on the sides and bottom, and properly labeled or color coded. During use, they must be accessible, kept upright, routinely replaced and not overfilled. FDA recommends FDA-cleared sharps disposal containers for healthcare facilities. Verify the exact quoted SKU and current supporting evidence instead of relying on a generic compliance claim.
SKU-level documentation review, selected U.S.-warehouse-supported fulfillment, packaging coordination and broader sharps-container sourcing for qualified B2B requirements.
Review product specifications, labeling, instructions, applicable performance information and available quality or regulatory records against SSC-020R or the exact alternative SKU.
Documentation Support →Selected inventory can be reviewed for domestic fulfillment based on exact SKU, case quantity, destination, current stock and project requirements.
Fulfillment Support →Eligible unit labels, cartons, artwork and packaging projects can be reviewed according to SKU, volume, target market and documentation requirements.
Packaging Program →Compare 0.2L compact, 1L standard-capacity and 0.05L portable sharps-disposal formats before standardizing a broader supply program.
View Sharps Containers →Compare nominal capacity, largest-sharp fit, opening and closure design, placement, fill visibility, regulatory evidence, case packing and disposal-path compatibility before standardizing a SKU.
Common procurement questions related to SSC-020R, compact capacity, sharps fit, fill line, final closure, packaging and bulk supply.
The current Tonmit product page lists the 0.2L sharps container as Inside Code SSC-020R with 100 pieces per case. Final packaging, label revision, color and availability should be confirmed on the quotation.
The current product page lists used insulin pen needles, lancets and selected small diabetes-care sharps. Final acceptance should be based on the complete post-use device fitting the exact opening and the intended waste stream.
Current product information and imagery show selected configurations with a translucent top and overfill warning / fill line. Confirm the exact label and indicator on the supplied SKU and replace the container according to the marked endpoint and product instructions.
Selected 0.2L configurations may include a final-lock mechanism. Confirm the closure design, activation method and instructions against the exact SKU before procurement.
There is no reliable universal piece count. Usable capacity varies with the device mix, dimensions after use, safety features, orientation, inlet geometry and the marked fill line. Use the exact container and representative devices for changeout planning.
Provide the target SKU, disposed-device profile, nominal capacity, opening and final-closure requirements, label and waste stream, estimated case quantity, destination, documentation list and private-label requirements if applicable.
Share the target SKU, disposed-device profile, estimated case quantity, destination, packaging, labeling and documentation requirements for a SKU-specific supply review.